Aluminum Capping & Trim Wrapping in Toronto and the GTA

What aluminum capping is, which trim can be wrapped, how coil gauge, finish and colour affect the result, when capping is the wrong choice, and typical GTA costs.

Updated Written by the Pro Aluminum Siding installation team
On this page
  1. What is aluminum capping, exactly?
  2. 10 parts of a house you can wrap in aluminum
  3. Coil gauge and thickness: what you are actually paying for
  4. PVC-coated vs painted coil: which finish should you choose?
  5. How to choose a capping colour that still looks right in 20 years
  6. How a sheet-metal brake bends a custom profile
  7. Fasteners, sealants and expansion: the details that decide how long it lasts
  8. When is aluminum capping the wrong choice?
  9. How long does aluminum capping last?
  10. Toronto’s climate and housing stock: why capping is so common here
  11. What does aluminum capping cost in the GTA?
  12. Example project scenario: full trim wrap on a 1950s bungalow
  13. Before you book: quote checklist, scope worksheet and timing
  14. Frequently asked questions
  15. Sources

Quick answer: Aluminum capping is a custom-bent aluminum skin, cut from prefinished coil on a sheet-metal brake, that wraps exposed wood trim so it never needs painting again. In the GTA it is used on window frames and sills, brick mould, door and garage openings, posts, beams, fascia and dormer trim. It only works over sound, dry wood, so rot must be repaired first.

  • Made from prefinished aluminum trim coil, bent on site to the exact shape of your trim.
  • Common thicknesses: nominal .019″ standard coil, or heavier .022″–.024″ coil for exposed, high-impact areas.
  • Choice of smooth painted coil or thicker PVC-coated coil, in dozens of colours.
  • Never a fix for active rot: decayed wood gets removed and rebuilt before any metal goes on.
  • Ballpark: $175–$450 per window, $250–$600 per entry door, $350–$900 per garage opening (2026, GTA).
  • Work is backed by a written contract plus Pro Aluminum Siding’s 5-year workmanship warranty.

What is aluminum capping, exactly?

Aluminum capping (also called trim wrapping, trim cladding or “metal wrap”) covers wood trim with a thin aluminum shell shaped to match it. The wood stays in place as the structure. The aluminum becomes the weather surface that sheds rain, snow and sun.

The raw material is trim coil: a roll of flat aluminum, usually 24 inches wide and 50 feet long, painted or coated at the factory. An installer measures each piece of trim, cuts the coil into strips, then bends those strips on a portable brake into the right profile. A window sill might need five or six bends. A plain fascia board might need two.

Because every piece is formed to fit one particular board, capping is a custom trade, not a box product. That is the main difference between capping and the extruded or vinyl trim pieces sold in stores. Off-the-shelf pieces come in fixed sizes. Coil can follow the odd dimensions that older GTA houses are full of.

Capping versus painting

Painted wood trim on a south or west wall in Toronto often needs scraping and repainting every few years. Capping replaces that cycle with a prefinished surface that only needs washing. You give up the ability to change colour with a brush, and you take on the job of keeping caulk joints in good shape. For most homeowners with ladders and second storeys, that trade is worth it.

10 parts of a house you can wrap in aluminum

Almost any exterior wood trim that is flat or has simple profiles can be capped. Here are the ten areas we wrap most often across Toronto and the surrounding region, with what makes each one different.

1. Window frames and exterior casings

The flat boards around a window are the classic capping job. On siding walls they tie into the J-channel; on brick they meet the masonry with a caulk joint. If your windows already have tired, dented or leaking capping, our page on replacing old window capping covers that job in detail.

2. Window sills

Sills take the most water of any trim, because rain runs straight down the glass onto them. A good sill wrap is bent with a slight outward pitch and a hemmed drip edge so water falls clear of the wall below rather than tracking back underneath.

3. Brick mould

Brick mould is the thick, profiled casing found where wood windows and doors meet a brick wall. Its curves are the hardest part to wrap neatly. Installers usually simplify the profile into a few crisp bends that read well from the street, rather than trying to copy every curve.

4. Entry door frames

Door jambs and casings take kicks, deliveries and constant hand contact, so heavier coil makes sense here. If the bottom of a jamb has gone soft, that has to be dealt with first; see window and door frame rot repair.

5. Garage door openings

Garage jambs and headers are large, low and often scuffed by bumpers and snow shovels. They have their own sizing and fastening details, covered on our garage door frame capping page.

6. Porch posts and columns

Square wood posts can be wrapped as four-sided boxes with tight corner seams. Posts are often pressure-treated lumber, which matters for fasteners (see the fastener section below). Round columns are generally not good candidates for brake-bent coil.

7. Beams and exposed headers

Carport beams, porch beams and garage headers can be boxed in aluminum on the sides and bottom. The top edge needs careful flashing so water cannot sit on the beam behind the metal.

8. Fascia boards

Fascia is the board along the roof edge that eavestroughs hang from. Wrapping it in aluminum is usually done together with soffit work, which we cover in depth under aluminum soffit and fascia.

9. Dormer trim and cheeks

Dormer corner boards, window surrounds and the small fascia on each side are high up and hard to repaint, which makes them ideal for capping. Larger dormer cladding jobs are part of our porch and dormer work.

10. Rake boards, frieze boards and corner trim

The sloped trim along a gable end, the band boards between storeys and vertical corner boards can all be wrapped to match the rest of the house. These are often forgotten in quotes, then stand out once everything around them is fresh.

Coil gauge and thickness: what you are actually paying for

Thickness is the single biggest factor in how well capping resists dents and rippling. Most aluminum trim coil is sold at a nominal .019 inch, and a Journal of Light Construction article notes that the actual metal is often a little thinner than that within manufacturing tolerance. Heavier coil, around .022 to .024 inch, costs more but stays flatter and resists dents better.

Coil optionNominal thicknessWhere it fits bestTrade-offs
Standard trim coilabout .019″Upper-storey window trim, dormer trim, fascia behind eavestroughsLower cost; dents more easily; shows ripples on wide flat faces
Heavy-duty trim coilabout .022″–.024″Door frames, garage openings, posts, wide sills, anything within reachCosts more per roll; slightly harder to bend tight hems
PVC-coated coil (either base)Base metal plus a thicker coatingAreas near busy roads, high-abrasion spotsBetter scuff resistance; can mar from sharp contact

Two finished jobs look identical on day one, so ask for coil thickness and product line in writing.

PVC-coated vs painted coil: which finish should you choose?

Both types are aluminum underneath; the difference is the finish. Smooth painted coil has a thin, hard baked-on paint film. PVC-coated coil, often sold with a textured or woodgrain surface, carries a much thicker coating. According to the same JLC article, that coating is about 3.5 mils thick compared with roughly 1 mil on smooth coil, and it handles abrasion and airborne pollution better.

FeatureSmooth painted coilPVC-coated coil
LookCrisp, flat, modernSlight texture or woodgrain; softer, more traditional
Finish thicknessAbout 1 mil of paintAbout 3.5 mils of PVC-based coating
Scuff and abrasion resistanceGoodBetter
Marring from sharp contactLess proneCan mark more easily
Near highways or industrial areasFineOften the better choice
Matching smooth modern windowsExcellentCan look mismatched beside sleek frames
CostUsually lowerUsually higher

In practice, smooth coil dominates on modern window replacements and black-trim makeovers, while textured coil suits older homes where it sits beside textured siding. If your house backs onto the 401, the QEW or another busy corridor, the extra coating is worth discussing.

How to choose a capping colour that still looks right in 20 years

Pick capping colour by looking at the fixed elements first: the brick, the roof, and the window frames you are keeping. Those are expensive to change; trim colour is the easiest to get wrong and the hardest to undo once installed.

Coil manufacturers sell a wide palette; Kaycan and Gentek, two familiar Canadian exterior brands, each offer their own range of trim coil colours. Exact names and availability change from year to year, so final selection happens with physical samples, not screens.

Five practical colour rules

  1. Match the window frame, not the siding, when capping windows. Capping that is a shade off the frame colour looks like a mistake; capping that contrasts with the wall looks intentional.
  2. Look at samples outdoors on the north side and the south side. Aluminum finishes shift noticeably between shade and full sun.
  3. Dark colours run hotter in summer sun, which means more movement at joints. That is manageable with correct fastening, but it is another reason to insist on proper expansion detailing.
  4. Whites are not all the same. Bright white, soft white and linen side by side can look surprisingly different against older vinyl windows that have yellowed.
  5. Plan for the whole house. If you will replace siding or eavestroughs in the next few years, choose a trim colour that works with that plan.
Get a written estimate

We measure on site, explain what we found and put the price in writing. Free, with no pressure.

How a sheet-metal brake bends a custom profile

A brake is a long clamp with a hinged bending leaf. The installer slides a strip of coil under the clamp to a marked line, locks it, and lifts the leaf to fold the metal to a precise angle. Repeating that along different lines produces any profile made of straight bends.

  1. Measure every face. Each surface of the wood trim (face, edge, return, sill nose) is measured individually, because older trim is rarely square or uniform from one window to the next.
  2. Draw the profile. The installer sketches the cross-section and adds hem allowances and overlaps, so the finished piece tucks behind adjoining pieces rather than butting into them.
  3. Cut the coil strip. A coil cutter or snips slice a strip to the total width of all faces plus allowances. Clean, straight cuts prevent wavy edges.
  4. Hem the exposed edges. The visible edge is folded back on itself. A hem stiffens the metal, hides the raw cut and gives a straight line that reads well from the street.
  5. Bend in sequence. Bends are made in an order that keeps earlier folds clear of the brake. Getting the sequence wrong means a profile that cannot physically be finished.
  6. Test-fit and adjust. The piece goes on dry first. Small tweaks with hand seamers correct angles where the wood is out of square.
  7. Fasten and seal. Once it fits, the piece is fastened in its concealed or low-visibility spots and joints are sealed where water could get behind.

The real skill is planning where laps go, so runoff always passes across a lap instead of into it.

Fasteners, sealants and expansion: the details that decide how long it lasts

Most capping failures are fastening and sealing failures, not material failures. Aluminum moves with temperature, water finds any upward-facing gap, and the wrong nail can corrode or buckle the metal.

Why aluminum moves

Aluminum expands roughly 23 millionths of its length for every degree Celsius of temperature change, per the Engineering ToolBox reference table. That sounds tiny, but it adds up. Working that number through for a 3-metre piece of trim whose surface goes from −20°C on a January night to +40°C on a sunny July afternoon gives about 4 millimetres of movement. Nail that piece tight at both ends and it has nowhere to go but outward, which is where ripples come from.

Fastener rules a good crew follows

  • Use aluminum or stainless-steel nails only; plain steel corrodes against aluminum and stains the finish.
  • Pre-punch or drill slightly oversized holes and do not drive nails tight, so the metal can slide.
  • Keep face-nailing to a minimum. Fasten through hems, bottom legs and laps where heads are hidden.
  • On pressure-treated posts and beams, use stainless-steel fasteners; the JLC article recommends this for wrapped treated lumber.
  • Where screws or adhesive are used (common on garage jambs and doors), they are placed so they still allow some movement.

Choosing and placing sealant

Sealant belongs where trim meets something different: brick, siding, a window frame or a door. It does not belong everywhere. Caulking every seam traps water that gets behind the metal, and a sealed bottom edge can hold moisture against the wood.

Sealant typeStrengthsWatch-outsTypical use on capping
PolyurethaneStrong adhesion to masonry and metal; durableCan be stiff in cold; tools less easilyCapping-to-brick joints
Hybrid (silyl-modified polymer)Bonds to most materials, flexible, UV-stable, colour-matched optionsUsually costs more per tubeGeneral perimeter joints, colour-matched trim
Siliconized acrylicCheap, easy to tool and cleanShorter life outdoors; shrinksNot a good choice for exterior capping joints
100% siliconeVery flexible, weather-resistantPoor adhesion on some coated finishes; cannot be paintedLimited; mostly glass-to-frame

Whatever the product, the joint needs a clean, dry surface and a proper joint shape. In deep gaps, a foam backer rod goes in first so the bead bonds to two sides only and can stretch.

When is aluminum capping the wrong choice?

Capping is the wrong choice whenever it would hide a problem rather than protect sound wood. Metal over a wet, decaying board seals in the moisture and lets rot keep spreading out of sight, sometimes into the wall framing.

Situations where we recommend something else first

  • Active rot. Repair or replace the wood, find out why it got wet, then cap. Rot repair is often a modest add-on when caught early.
  • Failing windows. If the sash is fogged, drafty or won’t lock, new capping on an old frame buys you very little. Consider replacing the window and capping afterwards.
  • Ongoing leaks from above. Water staining that starts at the head of a window can come from a roof, an overflowing eavestrough or missing flashing. Fix the source or the new capping will just channel the same water.
  • Heritage properties. Some municipalities regulate exterior changes on designated buildings or within heritage districts. Check with your city before covering original wood trim.
  • Old painted trim of unknown age. Trim on houses built decades ago may carry old lead-based paint. Capping is often a sensible way to cover it without sanding, but any cutting or scraping of that wood should be done with care. Ask your contractor how they handle it.
  • Highly ornate millwork. Fancy Victorian brackets and curved trim usually look better restored and painted than flattened under metal.

How long does aluminum capping last?

Well-installed aluminum capping commonly lasts for decades, because the metal itself does not rot, and the finish is usually the first thing to show age. What shortens its life is almost always installation, sealant or damage, not the aluminum.

Instead of quoting a single number, the matrix below shows what we look at when we judge how a capping job is ageing. It is our own inspection framework, based on what we routinely see when removing old capping in the GTA.

ComponentWhat ages firstEarly warning signTypical fix
Coil finishChalking and fading on sunny wallsWhite residue when you rub itWash; recap only if appearance matters
Perimeter caulkHardening, cracking, pulling awayHairline gaps at brick or sidingCut out and re-caulk
FastenersNails backing out from movementSmall dimples or loose cornersRefasten correctly
Sill wrapPooling where pitch was wrongDirt lines, standing water after rainRebend with proper slope and drip
Wood underneathRot from trapped moistureSoft spots, bulging metal, interior stainsRemove capping, repair wood, recap

Simple care that extends its life

Once a year, go over the capping with a car-wash mitt and gentle detergent, rinse it off, and look closely at every caulk joint while you are there. Avoid pressure washers aimed into seams; they force water behind the metal. Keep eavestroughs clear so overflow does not pour onto window heads all winter.

Toronto’s climate and housing stock: why capping is so common here

Two facts drive demand for capping in Toronto: a large share of older homes with original wood trim, and a climate with real temperature swings and heavy rain events. Here is what the public data shows.

  • Older homes are the norm. The City of Toronto’s housing backgrounder for the 2021 Census shows 29% of occupied dwellings dating from 1960 or before, with the same share again from 1961–1980. Houses from those decades commonly went up with wood window, door and fascia trim.
  • A wet baseline. The City’s climate report puts downtown Toronto’s average annual precipitation at about 819 mm for 1961–1990, with recent normals slightly wetter.
  • Warming, and wetter ahead. The same report shows average annual temperature rising from 8.9°C (1961–1990) to 9.7°C (1991–2020), and projects annual precipitation roughly 10% above the 1980s level by mid-century (the 2050s).
  • More winter rain. Winter precipitation is projected to increase most, with more of it falling as rain instead of snow. Rain on trim in winter, followed by freezing, is hard on paint and caulk.
  • Intense storms. The report cites recent storms delivering 80–100 mm of rain in two hours (August 2018) and over 100 mm in about three hours (July 2024).
  • Metal movement is predictable. Aluminum’s expansion coefficient of about 23 × 10⁻⁶ per °C means trim must be fastened to slide, as worked through in the fastener section above.

Put together: lots of ageing wood trim, frequent wetting, and wide seasonal swings. Wood paint struggles in those conditions. A properly detailed aluminum skin handles them far better, which is why capping is so common across Toronto districts like Scarborough and Etobicoke, where post-war houses are everywhere.

Not sure what your home needs?

Call and describe what you see. We will tell you honestly whether it is a repair, a replacement or nothing yet.

What does aluminum capping cost in the GTA?

Most capping is priced per opening or per linear foot, not per square foot. The table below brings together our typical GTA ballpark ranges (2026) for capping-related work. Your written quote after an on-site measure is what counts.

Capping jobTypical GTA ballpark range (2026)What pushes it up
Window capping$175–$450 per windowLarge or bay windows, complex sill and brick mould
Entry door frame capping$250–$600 per doorSidelights, transoms, heavier coil
Garage door frame capping$350–$900 per openingDouble doors, wide headers, damaged jambs
Aluminum fascia$7–$13 per linear ftHeight, eavestrough removal and reinstall
Dormer cladding or capping$1,500–$7,000Size, roof pitch, access, whether walls are re-clad
Wood rot repair before capping$150–$900 per openingHow far the rot has spread

Price also moves with the number of storeys, ladder or scaffold access, removal of old capping, rot found during work, colour and gauge, how many custom bends each piece needs, and the season. Bundling several areas into one visit usually lowers the cost per piece, because the brake is set up once.

Working through a whole-house budget

Using only the ranges above, a bungalow with ten windows, one entry door and a single garage would land roughly between $2,350 and $6,000 for capping alone (10 × $175–$450, plus $250–$600, plus $350–$900). Add rot repair only if the inspection finds it. That span is wide on purpose; the on-site measure narrows it.

Example project scenario: full trim wrap on a 1950s bungalow

Example project scenario (illustrative)

This is a composite of the kind of work we see around the GTA; it does not describe a real client. Picture a single-storey 1950s brick bungalow still wearing its original wood brick mould, painted white many times. The owners are tired of repainting every few summers and want the trim done in charcoal to suit new dark windows planned for next year.

Inspection. The probe test finds two soft sill corners on the west side, where afternoon sun and rain have done the most damage. Everything else is sound but has layers of flaking paint.

Plan. Because new windows are coming, the crew suggests capping only the fascia, garage opening, porch posts and door frame now, and leaving the windows until the new units are installed. That avoids paying to cap window trim that would be removed months later. The two soft sills get temporary repair and paint.

Materials. Heavy coil on the garage, door and posts; standard coil on the fascia, which sits behind the eavestrough. Smooth charcoal finish to match the future windows. Stainless nails on the pressure-treated porch posts.

Result. The house gets a consistent dark trim line now, and the window capping follows later in the same colour, so nothing looks patched together.

Before you book: quote checklist, scope worksheet and timing

Checklist: before you sign a capping quote

  • The quote lists every area to be capped, by location, not just “trim.”
  • Coil thickness and finish type (painted or PVC-coated) are written down.
  • The colour is named, and you have seen a physical sample outdoors.
  • It states what happens if rot is found, and how that extra work is priced.
  • Removal and disposal of any old capping is included or priced separately.
  • Fastener type is specified (aluminum or stainless) and sealant type is named.
  • Sill pieces will pitch away from the house and finish with a drip edge.
  • The contractor carries liability insurance and WSIB coverage.
  • The workmanship warranty is in writing, with its length stated.
  • You know who to call if a seam lifts or a joint opens later.

Plan your project with this capping scope worksheet

Template: aluminum capping scope worksheet

Walk around your house with this worksheet before asking for estimates. It makes quotes easier to compare and keeps forgotten trim off the “extra” list.

  • Windows: count ____ ; storey(s) ____ ; brick or siding wall ____ ; sills included? Y / N
  • Entry doors: count ____ ; sidelights or transom? Y / N
  • Garage openings: single ____ double ____
  • Posts / columns: count ____ ; square? Y / N ; pressure-treated? Y / N / unsure
  • Beams / headers: approximate length ____ ft
  • Fascia: approximate length ____ ft ; eavestroughs staying or being replaced? ____
  • Dormers: count ____ ; trim only or full cladding? ____
  • Other trim: rake boards / frieze / corner boards ____
  • Known soft spots or stains: where? ________
  • Colour: match windows / match siding / contrast ____
  • Timing: any window, siding or roof work planned in the next 3 years? ____

Once your worksheet is filled in, send it along with a few photos via our free estimate form, or phone us at (647) 699-3330. We serve homes across Toronto and nearby cities, including Mississauga and Markham; the full list is on our service areas page.

Should capping be done with siding, soffit or eavestrough work?

Yes, whenever those jobs are close in time. Capping, siding, soffit, fascia and eavestroughs all meet at the same edges, and doing them together lets each piece lap correctly over the next.

If you are planning aluminum siding installation or replacement, ask for capping to be priced in the same visit so colours come from the same production run. Eavestroughs are typically removed to wrap fascia and rehung afterwards, which is a good moment to swap in new seamless troughs if yours are leaking.

Book a free on-site measure

Every job comes with a written contract and our 5-year workmanship warranty.

Frequently asked questions

Is aluminum capping the same as aluminum trim?

Not quite. “Aluminum trim” can mean any aluminum accessory, including factory-made J-channel and corner posts. Aluminum capping specifically means flat coil bent on site to wrap an existing wood board. The wood stays as the backing and the metal becomes the weather surface, shaped to that board’s exact size and profile.

Can you cap over painted wood trim?

Yes, as long as the board beneath is firm and free of moisture. Loose, flaking paint is not a problem for the metal itself, because the capping covers it. What matters is that the board is sound. If paint is hiding soft or rotten wood, that section needs to be repaired before it is wrapped.

Will aluminum capping dent?

It can. Standard coil dents from hail, ladders, balls or bumpers more easily than heavy coil. That is why we often recommend heavier coil for door frames, garage openings and posts within reach, and standard coil for upper-storey trim. Small dents are cosmetic; if they bother you, individual pieces can be replaced without redoing everything.

Do I need a permit for aluminum capping?

Capping existing trim is generally treated as cosmetic exterior work on a house and does not usually need a building permit. Rules vary by municipality and property type, and heritage-designated homes can have extra restrictions. Confirm with your city’s building department before work begins, especially if structural repairs are part of the job.

Can aluminum capping be painted later?

Prefinished coil can be painted with the right primer and exterior paint, but the factory finish usually lasts longer than any site-applied paint. If you want a different colour, replacing the capping is often a better result than painting it. Ask about colour carefully up front to avoid either option.

How long does it take to cap a whole house?

A typical house with windows, one door and a garage commonly takes between one and three working days, depending on the number of pieces, height and weather. Rot repair adds time. Fascia and dormers take longer when eavestroughs must come down or scaffolding is needed. Your quote should include an estimated schedule.

Is capping better than replacing trim with PVC boards?

They solve different problems. PVC trim boards replace the wood entirely, which suits rotted or missing trim. Aluminum capping keeps sound wood and wraps it, usually at lower cost, and offers many colours. PVC moves more with heat than aluminum does, so long runs need their own detailing. Either can work well when installed properly.

Can capping be done in winter?

Yes, with limits. Coil is stiffer in deep cold and many sealants have minimum application temperatures, so very cold days are avoided for sealing. Installing in mild conditions also helps the metal sit flatter. Spring through fall is the easiest season, but many jobs are done in milder winter weather too.

What happens if rot is found during the job?

Work stops on that piece, we show you the damage, and we explain the repair and its price before going further. Rot repair before capping typically runs $150–$900 per opening in the GTA, depending on extent. Once the wood is replaced and dry, capping continues as planned. This should be spelled out in your written contract.

Does capping add insulation or stop drafts?

Capping itself adds almost no insulation. However, during the job, gaps between frames and walls are exposed and can be closed up with backer rod or a low-rise foam and sealed, which can reduce air leaks. If drafts come through the window sash itself, capping will not fix that; the window may need replacing.

Sources

Call Now: (647) 699-3330